Sony CRX-1611 User Manual

10

11

The drive should be connected to the computer with the following 

connectors:

• DC INPUT connector.

• AUDIO OUT connector (if you plan to connect audio equipment).

• IDE INTERFACE connector.

The pin assignment for the DC connector is as follows. 

After matching the beveled edges, insert the plug of the power supply 

cable to the DC INPUT connector on the rear of the drive and push it 

firmly in place.

IDE INTERFACE Connector

DC INPUT connector

AUDIO OUT 

connector

+5 V DC

+12 V DC

GND

DC INPUT connector

Power supply cable

(4-pin connection cable)

    Refer to your computers user manual for instructions on how to 

open the computer.

Do not mount the drive at an angle, it is only designed to be operated 

horizontally or vertically.

Some computers chasis require mounting rails on each side of the 

drive when installing new drives. If your system requires these rails 

you should contact your computer supplier.