Sony cyber-shot dsc-t500 User Manual
75
C
u
st
om
izi
ng the s
izi
ng the s
e
tt
ings
Settings
For details on the operation 1 page 69
Initializes the setting to the default setting. Even if you execute this function, the images
stored in the internal memory are retained.
stored in the internal memory are retained.
1
Touch [Initialize].
The message “Reset to default settings” appears.
The message “Reset to default settings” appears.
2
Touch [OK].
The settings are reset to the default setting.
The settings are reset to the default setting.
To cancel initializing
Touch [Cancel] or [BACK] in step 2.
• Be sure not to power off the camera while initializing.
Enables you to perform calibration when the touch panel buttons do not react at the
appropriate points where you touch.
Touch the “×” mark displayed on the screen with the corner of a “Memory Stick Duo” or the
like.
To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that
point are not effected.
appropriate points where you touch.
Touch the “×” mark displayed on the screen with the corner of a “Memory Stick Duo” or the
like.
To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that
point are not effected.
The × mark moves on the screen.
If you fail to touch the right spot, the calibration is not performed. Touch the × mark again.
If you fail to touch the right spot, the calibration is not performed. Touch the × mark again.
Initialize
Calibration