Sony cyber-shot dsc-t11 User Manual

Page of 128
82
Copying images to 
your computer 
— For Windows users
Recommended computer 
environment
OS:
 Microsoft Windows 98, Windows 
98SE, Windows 2000 Professional, 
Windows Millennium Edition, Windows 
XP Home Edition or Windows XP 
Professional
The above OS must be installed at the 
factory. Operation is not assured in an 
environment upgraded to the operating 
systems described above or in a multi-boot 
environment.
CPU:
 MMX Pentium 200 MHz or faster
USB connector:
 Provided as standard
Display:
 800 × 600 dots or more
High Color (16-bit color, 65,000 colors) or 
more
This camera conforms to USB 2.0.
Use with a USB 2.0 (High-Speed USB) 
compatible computer environment allows high-
speed data transfer.
If you connect two or more USB equipment to 
a single computer at the same time, some 
equipment, including your camera, may not 
operate depending on the type of USB 
equipment.
Operations are not guaranteed when using a 
USB hub.
Operations are not guaranteed for all the 
recommended computer environments 
mentioned above.
USB mode
There are two modes for connecting to a 
computer, [Normal] and [PTP]* modes. 
The factory setting is the [Normal] mode. 
This section describes the [Normal] mode 
as an example.
* Compatible only with Windows XP. When 
connected to a computer, only the data in the 
folder selected by the camera is copied to the 
computer. To select a folder, perform the 
procedure on page 60.
Communication with your 
computer
When your computer resumes from the 
suspend or sleep mode, communication 
between your camera and your computer 
may not recover at the same time.
When a USB connector is not 
provided on your computer
When neither a USB connector nor a 
“Memory Stick” slot is provided, you can 
copy images using an additional device. See 
the Sony Website for details.
http://www.sony.net/
Contents of the CD-ROM
x
USB Driver
This driver is needed in order to connect the 
camera to a computer.
When using Windows XP, you need not install 
the USB driver.
x
Image Transfer
This application is used to easily transfer 
images from the camera to a computer.
x
ImageMixer
This application is used to display and edit 
images that are stored in a computer.
The required operations may differ depending 
on your OS.
• Close down all applications running on 
the computer before installing the USB 
driver and application.
When using Windows XP or Windows 2000, 
log on as Administrators.
The display settings should be 800 × 600 dots 
or more and High Color (16-bit color, 65,000 
colors) or more. When set to less than 800 × 
600 dots or 256 colors or less, the model 
selection screen does not appear.
Enjoying images on your computer