Sony cyber-shot dsc-t11 User Manual
86
Connecting the camera to
your computer
your computer
a
Turn on your computer.
b
Insert the “Memory Stick Duo”
with the images you want to
copy into the camera.
with the images you want to
copy into the camera.
•
For further details on the “Memory Stick Duo,”
see page 19.
see page 19.
c
Connect the USB cradle
(supplied) and the AC Adaptor
(supplied), and plug the
adaptor into a wall outlet (wall
socket).
(supplied) and the AC Adaptor
(supplied), and plug the
adaptor into a wall outlet (wall
socket).
•
When you copy images to your computer using
the battery pack, battery shutoff may cause
copying to fail or data corruption. In addition,
power is not supplied from the USB cable, so
we recommend that you use the AC Adaptor.
the battery pack, battery shutoff may cause
copying to fail or data corruption. In addition,
power is not supplied from the USB cable, so
we recommend that you use the AC Adaptor.
d
Connect the USB cable to the
(USB) jack of the USB
cradle.
e
Connect the USB cable to your
computer.
computer.
•
When you use a desktop computer, we
recommend that you connect the USB cable to
the USB connector on the rear panel.
recommend that you connect the USB cable to
the USB connector on the rear panel.
•
When using Windows XP, the AutoPlay wizard
automatically appears on the desktop. Proceed
to page 89.
automatically appears on the desktop. Proceed
to page 89.
f
Connect the camera to the
USB cradle and turn on the
camera.
USB cradle and turn on the
camera.
•
Make sure the camera is securely connected to
the USB cradle.
the USB cradle.
“USB Mode Normal” appears on the
LCD screen of the camera. When a
USB connection is established for the
first time, your computer automatically
runs the used program to recognize the
camera. Wait for a while.
LCD screen of the camera. When a
USB connection is established for the
first time, your computer automatically
runs the used program to recognize the
camera. Wait for a while.
*
During communication, the access
indicators turn red.
indicators turn red.
•
If “USB Mode Normal” does not appear in step
6, confirm that [USB Connect] is set to
[Normal] on the Setup screen (page 115).
6, confirm that [USB Connect] is set to
[Normal] on the Setup screen (page 115).
• Do not remove the camera from the USB
cradle during USB connection, as the
image data may be destroyed. To end
the USB connection, see the note
image data may be destroyed. To end
the USB connection, see the note
P
on
page 87.
1
2
AC Adaptor
To a wall outlet
(wall socket)
(wall socket)
USB cradle
USB cable
POWER
USB Mode
Normal
Access
indicators*
indicators*