Sony cyber-shot dsc-t110d User Manual

Ta
ble
 of
 

Op
e

MENU/Settin

In

132

GB

1 Turn on your computer and insert the CD-ROM (supplied) into the CD-

ROM drive.

The installation menu screen appears.

• If it does not appear, double-click [Computer] (in Windows XP, [My Computer]) 

t 

(SONYPMB).

• If the AutoPlay screen appears, select “Run Install.exe” and follow the instructions that appear on the 

screen to proceed with the installation.

2 Click [Install].

The “Choose Setup Language” screen appears.

3 Select the desired language, then proceed to the following screen.

The “License Agreement” screen appears. 

4 Carefully read the agreement, click the radio button (

 

t  ) to accept 

the terms of the agreement, and then click [Next].

5 Follow the instructions on the screen to complete the installation.

• Restarting of the computer may be required. When the restarting confirmation message appears, 

restart the computer following the instructions on the screen.

• DirectX may be installed depending on the system environment of your computer.
• For the installation, connect the camera to the computer during the procedure (page 134).

6 Remove the CD-ROM after the installation is complete.

7 Start up the software.

• To start up “PMB,” click 

 (PMB) on the desktop. 

For the detailed operation method, see the following PMB support page (English only):
http://www.sony.co.jp/pmb-se/
or click 

 (PMB Help). 

• To start up “PMB” from the Start menu, select [Start] 

t [All Programs] t  

(PMB).

• If “PMB” was installed on your computer and if you re-install “PMB” using the supplied CD-ROM, 

you can start up all the applications from “PMB Launcher.” To start up “PMB Launcher,” double-
click 

 (PMB Launcher) on the desktop.

• Log on as Administrator.
• When “PMB” is started up for the first time, the confirmation message of the Information tool appears on 

the screen. Select [Start].

• If “PMB” has been already installed on your computer and that “PMB” version number is lower than that 

of the supplied CD-ROM, re-install “PMB” using the supplied CD-ROM.

• If the version number is higher than that of the supplied CD-ROM, you do not need to re-install “PMB”. 

When you connect the camera and the computer via USB cable, the available “PMB” function is 
activated.

• If “PMB” has already been installed on your computer and that “PMB” version number is lower than 5.0, 

some functions may become invalid after you install “PMB” using the supplied CD-ROM. Also, you can 
start up “PMB” or other various software from “PMB Launcher” installed at the same time. To start up 
“PMB Launcher,” double-click 

 (PMB Launcher) on the desktop.