Sony cyber-shot dsc-v1 User Manual
10
Charging the battery pack
,
Open the battery/“Memory
Stick” cover.
Stick” cover.
Slide the cover in the direction of the arrow.
• Be sure to turn off your camera when
charging the battery pack (page 14).
•
Your camera operates with the
“InfoLITHIUM” NP-FC11 battery pack (C
type) (supplied). You can use only C type
battery pack (page 120).
“InfoLITHIUM” NP-FC11 battery pack (C
type) (supplied). You can use only C type
battery pack (page 120).
,
Install the battery pack, then
close the battery/“Memory
Stick” cover.
close the battery/“Memory
Stick” cover.
Insert the battery pack with the b mark
facing toward the battery compartment as
illustrated.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
facing toward the battery compartment as
illustrated.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
•
The battery pack is easily inserted by pushing
the battery eject lever at the front of the battery
compartment down.
the battery eject lever at the front of the battery
compartment down.
,
Open the jack cover and
connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.
connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.
Open the cover in the arrow direction as
illustrated above. Connect the plug with the
v mark facing left.
illustrated above. Connect the plug with the
v mark facing left.
•
Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause
malfunction.
with a metallic object, as this may cause
malfunction.
•
Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.
1
2
Battery eject lever
3
DC plug
AC Adaptor
Jack cover
Getting started