Sony cyber-shot dsc-v1 User Manual

Page of 132
99
Tr
oub
le
s
hoot
in
g
Zoom does not work.
• The zoom magnification cannot be changed 
while shooting movies (MPEG Movie).
• You cannot use the zoom while a wide end 
conversion lens is mounted.
Smart zoom does not 
function.
• You cannot use smart zoom while shooting 
movies (MPEG Movie). 
• [Smart Zoom] is set to [Off] in the SET UP 
settings.
• The LCD screen is turned off.
• The image size is set to [5.0M] or [4.5M(3:2)].
p Set [Smart Zoom] to [On] (pages 39 and 115).
p Turn on the LCD screen (page 28).
p Set image size to other settings except [5.0M] and [4.5M(3:2)] 
The image is too dark.
• You are shooting a subject with a light source 
behind the subject.
• The brightness of the LCD screen is too low.
p Adjust the exposure (page 49).
p Adjust the brightness of the LCD screen (pages 39 and 117).
The image is too bright. 
• You are shooting a spotlighted subject in a dark 
location such as on a stage. 
• The brightness of the LCD screen is too bright.
p Adjust the exposure (page 49). 
p Adjust the brightness of the LCD screen (pages 39 and 117).
Vertical streaks appear 
when you are shooting a 
very bright subject.
• The smear phenomenon is occurring. 
p This is not a malfunction.
Noise appears in the 
image when you view the 
LCD screen in a dark 
place.
• The camera is functioning to increase the 
visibility of the LCD screen by temporarily 
brightening the image under conditions of low 
illumination.
p There is no effect on the recorded image.
Symptom
Cause
Solution