Sony cyber-shot dscs950s User Manual
95
Tr
o
uble
sh
ooti
n
g
Troubleshooting
A connection cannot be established.
•
The camera cannot be connected directly to a printer that is not compliant with the PictBridge
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
•
Check that the printer is turned on and can be connected to the camera.
•
Set [USB Connect] to [PictBridge] (page 57).
•
Disconnect and connect the dedicated USB cable again. If an error message is indicated on the
printer, refer to the operating instructions supplied with the printer.
printer, refer to the operating instructions supplied with the printer.
Cannot print images.
•
Check that the camera and the printer are properly connected using the dedicated USB cable.
•
Turn on the printer. For further information, refer to the operating instructions supplied with
the printer.
the printer.
•
If you select [Exit] during printing, images may not be printed. Disconnect and connect the
dedicated USB cable again. If you still cannot print your images, disconnect the dedicated
USB cable, turn the printer off and then on, then connect the dedicated USB cable again.
dedicated USB cable again. If you still cannot print your images, disconnect the dedicated
USB cable, turn the printer off and then on, then connect the dedicated USB cable again.
•
Movies cannot be printed.
•
Images shot using cameras other than this camera or images modified with a computer may
not be printed.
not be printed.
Printing is canceled.
•
You disconnected the dedicated USB cable before the
(PictBridge Connecting) mark
disappears.
Cannot insert the date or print images in the index mode.
•
The printer does not provide these functions. Consult the printer manufacturer as to whether
the printer provides these functions or not.
the printer provides these functions or not.
•
The date may not be inserted in the index mode depending on the printer. Consult the printer
manufacturer.
manufacturer.
“---- -- --” is printed on the date-inserted part of the image.
•
The image does not have the recording data so the date cannot be inserted. Set [Date] to [Off]
and print the image again (page 84).
and print the image again (page 84).
Cannot select the print size.
•
Consult the printer manufacturer as to whether the printer can provide the desired size.
PictBridge compliant printer