Sony cyber-shot dscu20ex5 User Manual

Page of 108
94
On moisture condensation
If the camera is brought directly from a cold to a warm 
location, or is placed in a very damp room, moisture 
may condense inside or outside the camera. Should this 
occur, the camera will not operate properly. 
Moisture condensation occurs easily when: 
• The camera is brought from a cold location such as a 
ski slope into a warmly heated room. 
• The camera is taken from an air-conditioned room or 
car interior to the hot outdoors, etc. 
How to prevent moisture condensation
When bringing the camera from a cold place to a warm 
place, seal the camera in a plastic bag and allow it to 
adapt to conditions at the new location over a period of 
time (about an hour). 
If moisture condensation occurs
Turn off the camera and wait about an hour for the 
moisture to evaporate. Note that if you attempt to shoot 
with moisture remaining inside the lens, you will be 
unable to record clear images. 
On internal rechargeable button battery
This camera has an internal rechargeable button battery 
for maintaining the date and time and other settings 
regardless of whether the power is on or off. 
This rechargeable button battery is continually charged 
as long as you are using the camera. However, if you 
use the camera for only short periods it discharges 
gradually, and if you do not use the camera at all for 
about one month it becomes completely discharged. In 
this case, be sure to charge this rechargeable button 
battery before using the camera. 
However, even if this rechargeable button battery is not 
charged, you can still use the camera as long as you do 
not record the date and time. 
Charging method of rechargeable button battery
Install charged size AAA Nickel Metal Hydride 
batteries, and leave the camera for 24 hours or more 
with the power off.