Sony cyber-shot u dsc-u50 User Manual

Page of 92
53
Enj
o
yi
ng
 im
ages on you
r co
m
p
ut
er
Copying images to your computer — For Windows users
Recommended computer 
environment
OS:
 Microsoft Windows 98, Windows 
98SE, Windows 2000 Professional, 
Windows Millennium Edition, Windows 
XP Home Edition, or Windows XP 
Professional
The above OS must be installed at the 
factory. Operation is not assured in an 
environment upgraded to the operating 
systems described above or in a multi-boot 
environment.
CPU:
 MMX Pentium 200 MHz or faster
USB connector:
 Provided as standard
Display:
 800 × 600 dots or more
High Color (16-bit color, 65,000 colors) or 
more
If you connect two or more USB equipment to 
a single computer at the same time, some 
equipment, including your camera, may not 
operate depending on the type of USB 
equipment.
Operations are not guaranteed when using a 
USB hub.
Operations are not guaranteed for all the 
recommended computer environments 
mentioned above.
USB mode
There are two modes for a USB connection, 
[NORMAL] and [PTP]* modes. The 
factory setting is the [NORMAL] mode. 
This section describes the USB connection 
using the [NORMAL] mode.
When the camera is connected to your 
computer via a USB cable, the camera can 
draw its power from your computer (USB 
Bus Powered).
* Compatible only with Windows XP. When 
connected to a computer, only the data in the 
folder selected by the camera is copied to the 
computer. To select a folder when the camera is 
connected to your computer, press MENU and 
perform the procedures to change a folder for 
playback.
Communication with your 
computer
When your computer resumes from the 
suspend or sleep mode, communication 
between your camera and your computer 
may not recover at the same time.
When a USB connector is not 
provided on your computer
When neither a USB connector nor a 
“Memory Stick” slot is provided, you can 
copy images using an additional device. See 
the Sony Website for details.
http://www.sony.net/
Contents of the CD-ROM
x
USB Driver
This driver is needed in order to connect the 
camera to a computer.
When using Windows XP, you need not install 
the USB driver.
x
Image Transfer
This application is used to easily transfer 
images from the camera to a computer.
x
ImageMixer
This application is used to display and edit 
images that are stored in a computer.
This section describes the Windows Me screen 
as an example. The required operations may 
differ depending on your OS.
• Close down all applications running on 
the computer before installing the USB 
driver and application.
When using Windows XP or Windows 2000, 
log on as Administrator.
The display settings should be 800 × 600 dots 
or more and High Color (16-bit color, 65,000 
colors) or more. When set to less than 800 × 
600 dots or 256 colors or less, the model 
selection screen does not appear.
Enjoying images on your computer