Eaton IPC3601-F3-3316 User Manual

© 2008 Eaton Corporation. All Rights Reserved. All specifications are subject to change without notice.

CB

•

1.72” (1U) x Depth 9.5” x Width 19.0”

•

Weighs approximately 12 lbs.

•

Powder coated black steel

•

Detachable mounting brackets allow for 
several mounting options

•

IPC3601 has 8 IEC 60320 Type 
C13 (computer style) outlets 

•

IPC3602 has 8 NEMA 5-15R 
(3 prong) outlets

•

Main power system on

•

Power “on” to outlets 1-8

•

2 Data and ethernet link

•

IEC 60320 Type C20 Inlet 

•

Mating power cables must be  

 

ordered separately

•

IPC3601 has a full range power  

 

supply for use at 100-240V

•

Common Mode - Line to Ground

•

Differential Mode - Line to Line

•

Filtered inlet isolates noise before  

 

entering the system

•

IPC3601-F3-3316 – 

•

Line to Neutral (or Line)

•

Push button circuit breaker pops out  

 

when an overload occurs 

•

Push to reset

•

User name/password security

•

Settings allow the administrator to  

 

disable unused interfaces

•

Serial RS232 via RJ22 connector on the 
rear. 6’ RJ22 to DB9 cable included

•

Serial baud rate is 9600 default or   

 

38,400 maximum

•

Ethernet (10/100) network via RJ45  

 

connector on the rear. 6’ network 
cable included 

•

Network setup allows DHCP or any  

 

static public/private IP address

•

Web interface provides a graphic  

 

control interface through a web  

 

browser (IE, Netscape, Mozilla)

•

Telnet interface provides a text menu    
control interface with any terminal  

 

emulation software  

•

SNMP allows read/write capability  

 

with trapping

•

E-mail notification system provides e-mail 
alerts or logs showing user activity

•

Serial interface provides a text menu    
control interface with any terminal  

 

emulation software

•

FTP utility allows firmware upgrades 

•

Administrator and multiple users can    
be configured

•

User level access can be limited to  

 

specific outlets

•

Unit and outlet names can be configured

•

Outlet groups can be created to  

 

perform an action on multiple outlets

•

Outlet control includes individual,  

 

group and all outlet global control

•

Outlet actions include on or off and reboot

•

Global sequence allows all the  

 

outlets to be turned on or off in a   

 

preset sequence up to 999 seconds

•

Outlet reboot automatically turns an outlet 
off and back on with one command at a 
preset time up to 999 seconds

•

E-mail notification allows up to two  

 

e-mail addresses to receive notifications 
of alerts or events

•

Administrator can configure on or off    
events for outlets or groups. The event   
occurs at the preset time daily or weekly