Sony D-V55 User Manual

You can play back a CD through other
stereo equipment or record a CD on a
cassette tape or video tape. Refer to the
instruction manual supplied with other
equipment for details.
Before making connections, turn off
each equipment.

•Before you play the CD, turn down the

volume of the connected equipment so as
not to damage the connected speakers.

•The beep sound is not output from the

AUDIO/VIDEO OUT jack.

•You cannot adjust the volume of output

signals from the AUDIO/VIDEO OUT
jack on this player.

•When you record a CD on a cassette tape

using a tape recorder that has the blank
search function, release the ESP function.
If the ESP function is on, the blank search
function does not work.

Normally, every time you stop and
play, playing starts from the beginning
of the audio CD. The resume play
function, however, let you listen to from
the point where you last turned off the
player.

Set RESUME to ON.

To cancel resume play, set RESUME to
OFF.

•Even if RESUME is set to ON, playing

starts from the beginning when you open
the lid.

•The resume point may be inaccurate by

about 30 seconds.

You can turn off the beep that sounds as
you operate your player.

Disconnect the power source (AC
power adaptor or alkaline batteries).
While you press and hold down 

p,

connect the power source again. To
make the beep sound again, disconnect
the power source, and then connect it
without pressing 

p.

•While playing the VIDEO CD, the beep

does not sound.

RESUME

ON

OFF