Sony DAV-DZ330 User Manual

Note

• Remove the screws that are indicated in the

illustration. Do not remove other screws.

Insert the wireless transmitter.

Note

• Insert the wireless transmitter with the S-AIR

logo facing up.

• Insert the wireless transmitter so that the V

marks are aligned.

• Do not insert anything other than the wireless

transmitter into the EZW-T100 slot.

Make sure to use the same screws to
secure the wireless transmitter.

To insert the wireless
transceiver into the S-AIR sub
unit

For details on installing the wireless transceiver
into the S-AIR sub unit, such as a surround
amplifier or S-AIR receiver, see the operating
instructions of the S-AIR sub unit.

Tip

• When you change the S-AIR configuration, Sony

recommends that you perform [AUTO
CALIBRATION] (page 65).

Simply by matching the ID of the main unit and
the S-AIR sub unit, you can activate wireless
transmission.

To set the ID of the unit

Press SYSTEM MENU.

Press

X/x to select “S-AIR ID,” then

press

The selected item appears in the front panel
display.

Press

X/x to select the desired ID, then

press .

You can select any ID (A, B, or C).

Press SYSTEM MENU.

Set the S-AIR sub unit to the same ID.

Wireless transmission is activated as
follows (example):

Tip

• To confirm the current ID, perform Steps 1 to 3

above. When you pair the unit with an S-AIR sub unit
(page 55), “(PAIRING)” appears beside ID in the
front panel display.

EZW-T100

W-

Rear of the unit

EZW-T100

EZW

-T100

Rear of the unit

Setting the S-AIR ID to activate
wireless transmission

For the surround amplifier
For the S-AIR receiver

ID A