Sony DAV-DS1000 User Manual

GB

EURO AV

OUTPUT

(TO TV)

EURO AV

INPUT

(FROM VIDEO)

SYSTEM CONNECTOR

TUNER INPUT

WIRELESS REAR

L

R

SPEAKER

IMPEDANCE USE 4

Ω

FRONT L

REAR L

CENTER

FRONT R

REAR R

FOOT

LIGHT

HIGH

LOW

OFF

Refer to the instructions supplied with the components to be connected.

Connect the SCART (EURO AV) cord to the t EURO AV INPUT (FROM VIDEO) jack of
the subwoofer. Be sure to make the connections securely to avoid hum and noise.

• Do not connect the system to a VCR. If you pass video signals from the system via a VCR, you may not receive

a clear image on the TV screen.

• If you cannot view the picture from a VCR through this system which is connected to a TV with RGB

component jacks, set 

 to t (Audio/Video) on your TV. If you select 

 (RGB), the TV cannot receive the

signal from the VCR.

• If you want to use your VCR’s SmartLink function, connect the VCR to your TV’s SmartLink jack.
• The SmartLink function may not work properly if your VCR is connected to your TV via the SCART (EURO

AV) jacks on the subwoofer.

• If you connect the system to your TV via the SCART (EURO AV) jacks, the TV’s input source synchronises with

the system automatically when you start playback or press any button except for ! on the subwoofer or 1 on
the remote. In this case, select the COMMAND MODE DVD/TV switch to TV.

• The system does not output S video signals.
• When you select “DVD” by pressing FUNCTION (page 64), the video signal and RGB signal are not output

from the t EURO AV INPUT (FROM VIDEO) jack. Also, the system cannot output the component video
signal.

• When you select “VIDEO” by pressing FUNCTION (page 64), the audio signal from the t EURO AV INPUT

(FROM VIDEO) jack is output to the connected speakers. The audio signal is not output from the T EURO AV
OUTPUT (TO TV) jack.

SCART (EURO AV) cord

Subwoofer

VCR