Sony D710 User Manual

Page of 40
11 
GB
Let’
s
 get the pho
to 
fr
am
re
ady
Let’s get the photo frame ready
Remote control (except for DPF-
D700)
Pull out the protective sheet before use as shown in the 
figure.
Using the remote control
Point the top end of the remote control towards the remote sensor on 
the photo frame.
Stand
Turn the stand clockwise until the stand stops turning and 
is firmly attached to the stand socket on the rear panel.
You can set the photo frame to portrait or landscape orientation by 
rotating it without moving the stand.
Protective sheet
P Notes
• If the remote control stops 
working: 
Replace the battery (CR2025 
lithium battery) with a new one.
• When the lithium battery becomes 
weak, the operating distance of the 
remote control may shorten, or the 
remote control may not function 
properly. In this case, replace the 
battery with a Sony CR2025 
lithium battery. Use of another 
battery may present a risk of fire or 
explosion.
Replacing procedures: 
CD-ROM (Handbook) page 10
z
Tips
x When the photo frame is 
placed in the portrait 
orientation
• The display is automatically 
rotated on the portrait orientation.
• A video file is not rotated 
automatically even if you change 
the orientation of the photo frame 
(DPF-D1020/D820/D720 only).
x Sony logo
When the photo frame is placed in 
the portrait orientation or when you 
turn off the power, the Sony logo 
doesn't light up.
P WARNING
Battery may explode if mistreated. 
Do not recharge, disassemble or 
dispose of in fire.
Continued