Sony DASK-S704 User Manual

Page of 72
7
(GB)
Starting the DASK-S704
There are two ways to start the DASK-S704 Sampling Function Sofware:
• Starting when you turn on the power of the DRE-S777
• Starting using the “GoToSample” function on the SETUP display of the
DRE-S777 or DASK-S701/S702/S703 sampling reverb software
Starting the DASK-S704 by Turning on the Power of the DRE-S777
Insert the CD-ROM and the Memory Stick supplied with the DASK-S704
into the DRE-S777 and turn on the power of the DRE-S777 as follows:
1
Make sure that the erasure prevention switch at the rear of the Memory
Stick is set to the left position (not the LOCK position).
LOCK
Note
If the erasure prevention switch is set to LOCK (right position), the
Memory Stick does not operate.  Be sure to set the switch to the
position as illustrated above.
2
Insert the Memory Stick into the PC card adapter supplied with the
DRE-S777 and insert them into the MEMORY CARD insertion slot of
the DRE-S777.
3
Press the POWER switch on the DRE-S777 to turn it on.
4
Press the Z key on the DRE-S777.
The CD tray opens.
PC card adapter (supplied)
With the arrow on
the top-left corner
Memory Stick
Erasure prevention switch
(continued)