Sony DASK-S704 User Manual

(GB)

Starting the DASK-S704 Using the “GoToSample” Function of the
Sampling Reverb Software

When you use the DRE-S777 or DASK-S701/S702/S703 sampling reverb
software (Version 2.0) CD-ROM, you can start the DASK-S704 from
“GoToSample” on the SETUP display of the sampling reverb software.

Highlight “GoToSample” on the SETUP display of the sampling
reverb software.

SETUP display of the DRE-S777 or DASK-S701/S702/S703

SETUP

GoToSample

Licence :

PreDelay

: ms

Serial Sel : RS232C [ 9600]
Service :

Enter

Press the F4 key.
“Go To Sampling CDROM?” is displayed in a pop-up window.

Press the F4 key.
“Please change DASK-S704 CDROM and MS” is displayed.

Change the Memory Stick and CD-ROM to those supplied with the
DASK-S704.

To insert/remove the CD-ROM and Memory Stick, see “Starting the DASK-
S704 by Turning on the Power of the DRE-S777” on page 7.

Press the F4 key.
The DASK-S704 Sampling Function Software is loaded from the CD-
ROM. The loading is complete within about 3 minutes. After loading,
the DASK-S704 initial display appears.

SAMPLE

Enter

Rehearsal

Sampling
Compile
Change MS

MS:xxxxxxxx 24MB Available
Fs/Period=Fs/5.5sec
Repeat =16
Input =AD
Clock =Internal 48.0 kHz

Notes

• When a Memory Stick is changed, “Please insert MS” message may

appear if the DRE-S777 cannot recognize the Memory Stick. In this
case, press the F4 key again.

• If you insert a Memory Stick which is not the DASK-S704 Memory

Stick, “Licence code error Please change Licence MS” is displayed.
Change to the DASK-S704 Memory Stick, then press the F4 key.