Sony DAV-DS1000 User Manual
Getting Star
ted
27
GB
Step 3: TV and Video Component Hookups
Required cords
Video cord for connecting a TV monitor
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded sleeves to the appropriate jacks on
the components.
the components.
Jacks for connecting video components
Connect a
To the
TV monitor
MONITOR OUTPUT jack
VCR, etc.
VIDEO 1 jacks
Digital satellite receiver, etc.
VIDEO 2 jacks
z
When using the S VIDEO jack instead of the video jacks
Your TV monitor must also be connected via an S VIDEO jack. S video signals are on a separate bus from the
video signals and will not be output through the video jacks.
video signals and will not be output through the video jacks.
z
When using the COMPONENT VIDEO OUTPUT jacks (Y, P
B
/C
B,
P
R/
C
R
) instead of the video jacks
Your TV monitor must also be connected via COMPONENT VIDEO OUTPUT jacks (Y, P
B
/C
B
, P
R
/C
R
). If your
TV accept progressive format signals, you must use this connection and set “COMPONENT OUT” to
“PROGRESSIVE” in “SCREEN SETUP” (page 71).
“PROGRESSIVE” in “SCREEN SETUP” (page 71).
Notes
• When you select VIDEO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but
not from the VIDEO 1 VIDEO OUTPUT and AUDIO OUTPUT L/R jacks.
• When you use the Video 1 line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH
STEREO mode, the line outputs may not function properly.
• When “PROGRESSIVE” is selected in “SCREEN SETUP,” no signal is output from the MONITOR OUTPUT
jacks.
• When the mode of the system is set to “DVD,” the signal is output from the S VIDEO or COMPONENT VIDEO
OUTPUT jacks.
• When the mode of the system is set to “DVD” and “PROGRESSIVE” is selected in “SCREEN SETUP,” the
signal is output only from the COMPONENT VIDEO OUTPUT jacks.
Red (R/audio)
Yellow
Yellow
Yellow (Video)
White (L/audio)
Red (R/audio)
Yellow (Video)
White (L/audio)
continued