Sony DAV-LF1 User Manual

You can control your TV using the buttons 
below.

When you set the remote to the TV mode, you 
can use the number buttons for controlling the 
TV.

The TV button turns red and the remote is set to 
the TV mode. You can select the TV channels by 
using the number buttons.
>10 is for selecting the channel number greater 
than 10.
To cancel the TV mode, press the TV button 
again.

• Depending on the TV, you may not be able to control 

your TV or to use some of the buttons above.

• The TV button turns off when you do not operate the 

remote for 10 seconds.

Depending on the TV manufacture, the following 
method also works. Press >10, then the number. (For 
example, for channel 25, press >10, then 2 and 5.)

SONY TV DIRECT allows you to turn on your 
SONY TV and this system, change the system 
mode to “DVD,” and then switch the TV’s input 
source you set with one button push.

When you connect the EURO AV OUTPUT 
(TO TV) T jack of the system to the EURO 
AV INPUT jack of your TV using the SCART 
(EURO AV) cord (not supplied), you do not 
need to perform the following preparation.

Register the TV’s input source connected to this 
system.

The TV’s input source is selected.
When you successfully set the TV’s input source 
code, the TV button flashes twice slowly. If the 
setting is unsuccessful, the TV button flashes 
five times quickly.

TV [/1

Turn the TV on or off.

TV/VIDEO

Switch the TV’s input source 
between the TV and other input 
sources.

TV VOL +/–

Adjust the TV volume.

TV CH +/–

Select the TV channel.

TV CH +

TV/VIDEO

Number 
buttons

With cover opened.

SONY TV 
DIRECT

TV button