Sony DAV-LF1 User Manual

To obtain the best possible surround sound, set 
for the size of the speakers you have connected 
and their distance from your listening position. 
Then use the test tone to adjust the level and the 
balance of the speakers to the same level.

Select [SPEAKER SETUP] in the Setup 
Display. For details, see “Using the Setup 
Display” (page 86).
The default settings are underlined.

Select the item, then press CLEAR.

x SIZE

If you do not connect center or surround 
speakers, or move the surround speakers, set the 
parameters for [CENTER] and [SURROUND] 
and specify the surround speaker position and 
height. Since the front speaker and subwoofer 
settings are fixed, you cannot change them.

• When you select an item, the sound cuts off for a 

moment.

• Depending on the settings of other speakers, 

subwoofer may be excessive.

x DISTANCE

The default distance setting for the speakers in 
relation to the listening position is shown below.
When you set the distance using the Quick Setup 
(page 35), the settings is automatically 
displayed.

SPEAKER SETUP

DISTANCE:

TEST TONE:

SIZE:

BALANCE:

LEVEL: 

A

A

B

B

Position diagram

YES

YES: Normally select this.

NONE: Select this if no center 
speaker is used. 

BEHIND: Select this if surround 
speakers are located in section B.

SIDE: Select this if surround 
speakers are located in section A.

NONE: Select this if no surround 
speaker is used.

YES