Sony dav-sb300 User Manual
56
GB
Notes
• The TV button turns off when you do not operate the
remote for 10 seconds.
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
Tip
Depending on the TV manufacture, the following
method works. For double-digit number, press
-/-- first and then number. (For example, for channel
25, press -/--, then 2 and 5.)
method works. For double-digit number, press
-/-- first and then number. (For example, for channel
25, press -/--, then 2 and 5.)
SONY TV DIRECT allows you to turn on your
SONY TV and this system, change the system
mode to “DVD,” and then switch the TV’s input
source you set with one button push.
SONY TV and this system, change the system
mode to “DVD,” and then switch the TV’s input
source you set with one button push.
When you connect the T EURO AV OUTPUT
(TO TV) jack of the system to the EURO AV
INPUT jack of your TV using the SCART
(EURO AV) cord (not supplied), you do not
need to perform the following preparation.
(TO TV) jack of the system to the EURO AV
INPUT jack of your TV using the SCART
(EURO AV) cord (not supplied), you do not
need to perform the following preparation.
Preparation
Register the TV’s input source connected to this
system.
system.
Press and hold TV/VIDEO while entering
the code for the TV’s input source to
connect this system (see table below)
using the number buttons.
the code for the TV’s input source to
connect this system (see table below)
using the number buttons.
TV’s input source is selected.
If you successfully set the TV’s input source
code, the TV button flashes twice slowly. If the
setting is unsuccessful, the TV button flashes
five times quickly.
If you successfully set the TV’s input source
code, the TV button flashes twice slowly. If the
setting is unsuccessful, the TV button flashes
five times quickly.
Using the SONY TV DIRECT
Function
Function
1
2
3
4
5
8
0
6
7
10
9
TV CH +
Number
buttons
buttons
TV/VIDEO
SONY TV
DIRECT
DIRECT
TV