Sony DAV-HDX276 User Manual

Page of 116
Contr
o
l f
o
r HDMI/
Extern
al A
u
dio 
D
e
vic
e
73
GB
Using the Control for 
HDMI Function for 
“BRAVIA” Sync
This function is available on TVs with the 
“BRAVIA” Sync function only.
By connecting Sony components that are 
compatible with the Control for HDMI function 
with an HDMI cable (not supplied), operation is 
simplified as below:
– Theater/Theatre Mode (page 74)
– One-Touch Play (page 74)
– System Power Off (page 75)
– System Audio Control (page 75)
– Volume Limit (page 75)
Control for HDMI is a mutual control function 
standard used by CEC (Consumer Electronics 
Control) for HDMI (High-Definition 
Multimedia Interface).
The Control for HDMI function will not work in 
the following cases:
– When you connect this system to a 
component which is not compatible with the 
Control for HDMI function.
– A component does not have an HDMI jack.
There are convenient buttons on the system’s 
remote for operating the TV, such as 
THEATER/THEATRE*, ONE-TOUCH 
PLAY, TV [/1. For details, see “Controlling the 
TV with the Supplied Remote” (page 85) a
nd 
refer to the operating instructions of the TV.
* The button name differs depending on the area.
Note
• Depending on the connected component, the Control 
for HDMI function may not work. Refer to the 
operating instructions supplied with the component.
• The Control for HDMI function may not work if you 
connect a component other than Sony, even if the 
component is compatible with the Control for HDMI 
function.
(Control for HDMI - Easy Setting)
The system is compatible with the Control for 
HDMI - Easy Setting function. If the TV is 
compatible with the Control for HDMI - Easy 
Setting function, you can set the system’s 
[CONTROL FOR HDMI] function 
automatically by setting the TV. For details, 
refer to the operating instructions of the TV.
If the TV is not compatible with the Control for 
HDMI - Easy Setting function, set the Control 
for HDMI function of the system and TV 
manually.
Note
• Displayed items vary depending on the country 
model.
1
Make sure that the system and the TV 
are connected with an HDMI cable.
2
Turn on the TV and press [/1 to turn on 
the system.
3
Switch the input selector on your TV so 
that the signal from the system through 
the HDMI input appears on the TV 
screen.
4
Set the Control for HDMI function of the 
system and TV.
For details of the setting of the system, see 
the following Steps. For details of the 
setting of the TV, refer to the operating 
instructions of the TV (depending on the 
TV, the default setting of the Control for 
HDMI function is set to off).
Control for HDMI/External Audio 
Device
THEATER
BRAVIA Sync
ONE-TOUCH
PLAY
TV
Preparing for the Control for 
HDMI function