Sony DCR-HC22E User Manual

Page of 92
23
Recording/Playback
DCR-HC17E/HC19E/HC21E/HC22E 2-586-501-11(1)
•  A mirror-image of the subject appears on the 
LCD screen, but the picture will be normal 
when recorded.
To use a tripod ........................
Attach the tripod (optional: the length of 
the screw must be less than 5.5 mm (7/32 
inches)) to the tripod receptacle 
 using a 
tripod screw.
Playback
To play back the images with added 
special effects .........................
See [P EFFECT] on page 40.
Recording/Playback
To check the remaining battery 
(Battery Info) ..........................
Set the POWER switch up to OFF (CHG), 
then press DISP/BATT INFO 
. The 
battery information appears for about 7 
seconds. Keep the button pressed to view it 
for about 20 seconds.
Remaining battery (approx.)
BATTERY INFO
BATTERY CHARGE LEVEL
REC TIME AVAILABLE
LCD SCREEN
VIEWFINDER
:
:
64
84
min
min
0%
50%
100%
Recording capacity (approx.)
To turn off the operation confirmation 
beep ....................................
See [BEEP] on page  46.
To initialize the settings .............
Press RESET 
 to initialize all the 
settings, including the setting of the date 
and time.
Other part names and functions
  Speaker
Sounds come out from the speaker.
  For how to adjust the volume, see page 21.
  REC lamp
The REC lamp lights up in red during 
recording (p. 46).
  Remote sensor (DCR-HC19E/HC21E/
HC22E)
Point the Remote Commander (p. 28) 
towards the remote sensor to operate 
your camcorder.
  Internal stereo microphone