Sony dav-s888 User Manual
Getting Star
ted
19
GB
To avoid short-circuiting the speakers
Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does
not touch another speaker terminal or the bare wire of another speaker cord.
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does
not touch another speaker terminal or the bare wire of another speaker cord.
Examples of poor conditions of the speaker cord
After connecting all the components, speakers, and AC power cords (mains leads) of the system
and the subwoofer, output a test tone to check that all the speakers are connected correctly. For
details on outputting a test tone, see page 27.
If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a
speaker other than the one currently displayed on the front panel display, the speaker may be
short-circuited. If this happens, check the speaker connection again.
and the subwoofer, output a test tone to check that all the speakers are connected correctly. For
details on outputting a test tone, see page 27.
If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a
speaker other than the one currently displayed on the front panel display, the speaker may be
short-circuited. If this happens, check the speaker connection again.
Note
Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the
cords are reversed, the sound will be distorted and will lack bass.
cords are reversed, the sound will be distorted and will lack bass.
Stripped cords are touching
each other due to excessive
removal of insulation.
each other due to excessive
removal of insulation.
Stripped speaker cord is
touching another speaker
terminal.
touching another speaker
terminal.