Sony dcr-dvd908e User Manual
20
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 104) after
attaching it to your camcorder.
battery pack (H series) (p. 104) after
attaching it to your camcorder.
b
Notes
• You can use only "InfoLITHIUM" battery pack
H series.
1
Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (The default setting).
direction of the arrow to OFF
(CHG) (The default setting).
2
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
Lift up the viewfinder and attach
the battery pack by sliding it in
the direction of the arrow until it
clicks.
it in the direction of the arrow
until it clicks.
Lift up the viewfinder and attach
the battery pack by sliding it in
the direction of the arrow until it
clicks.
3
Connect the AC Adaptor to the
DC IN jack of your camcorder.
DC IN jack of your camcorder.
Open the jack cover, and connect the
DC plug of the AC Adaptor.
DC plug of the AC Adaptor.
Match the v mark on the DC plug with
the v mark on your camcorder.
the v mark on your camcorder.
4
Connect the mains lead to the AC
Adaptor and the wall socket.
Adaptor and the wall socket.
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery is fully
charged.
charging starts. The CHG (charge) lamp
turns off when the battery is fully
charged.
5
Disconnect the AC Adaptor from
the DC IN jack on your
camcorder.
the DC IN jack on your
camcorder.
b
Notes
• Disconnect the AC Adaptor from the DC IN
jack holding both the camcorder and the DC
plug.
plug.
1
2
4
4
3
POWER switch
DC IN jack
DC plug
AC Adaptor
Mains lead
To the wall socket
Jack cover
CHG
(charge) lamp
(charge) lamp
Battery