Sony DCR-PC109E User Manual

Page of 148
Read this first
3
• Television programs, films, video tapes, and other 
materials may be copyrighted. Unauthorized 
recording of such materials may be contrary to the 
copyright laws.
Notes on the LCD panel, viewfinder, and 
lens
• The LCD screen and the viewfinder are 
manufactured using extremely high-precision 
technology, so over 99.99% of the pixels are 
operational for effective use.
However, there may be some tiny black points and/
or bright points (white, red, blue, or green in color) 
that appear constantly on the LCD screen and the 
viewfinder.
These points are normal results of the manufacturing 
process and do not affect the recording in any way.
• Exposing the LCD screen, the viewfinder, or the lens 
to direct sunlight for long periods of time may cause 
malfunctions. Be careful when placing the camera 
near a window or outdoors.
• Do not aim at the sun. Doing so might cause your 
camcorder to malfunction. Take pictures of the sun 
only in low light conditions, such as at dusk.
Note on connecting other device
Before connecting your camcorder to other device 
such as a VCR or a computer with a USB or i.LINK 
cable, be sure to insert the connector plug in the proper 
direction. If you insert the connector plug forcibly in 
the wrong direction, the terminal may be damaged, or 
this may cause a malfunction of your camcorder.
Notes on using this manual
• The images of the LCD screen and the viewfinder 
used on this manual are captured using a digital still 
camera, and thus may appear different from what 
you see.
• The illustrations used on this manual are based on 
the model DCR-PC109E.
Notes on using the camcorder
• Hold the camcorder, putting your wrist through the 
belt and your fingers lightly on the finger rest.
• To ensure a good grip, fasten the Strap Belt as shown 
in the following illustration. If the Strap Belt hangs 
out too far, tuck it in the hand pad.
• The Strap Belt can also be used as a wrist strap  
• When you are using the touch panel, place your hand 
on the back side of the LCD panel to support it. 
Then, touch the buttons displayed on the screen.
• You can change the language to be used for screen 
display on your camcorder (p. 25).
• Be careful not to press buttons on the LCD frame 
accidentally when you open or close the LCD panel, 
or when you adjust the angle of the LCD panel.
• Do not hold the camcorder by the following parts.
Finger rest
Touch the button on the LCD screen.
Viewfinder
LCD panel
Battery pack
,
continued