Sony DCR-HC33E User Manual

DCR-HC32E/HC33E/HC39E/HC42E/HC43E 2-584-907-11(1)

Connecting an analog VCR to the computer via your 

camcorder (Signal convert function)
(DCR-HC32E/HC33E/HC42E/HC43E)

Using the A/V connecting cable and an i.LINK cable (optional), you can convert an analog 
signal output from an analog device such as a VCR to a digital signal and transfer it to a 
digital device, such as a computer, via your camcorder.
Software that can record the video signal must be installed on your computer beforehand.

1

2

A/V jack

(yellow) (white)

(Red)

VCR

Computer

To i.LINK (IEEE 

1394) jack

 DV Interface

i.LINK cable (optional)

i.LINK jack

:Signal flow



Connect the A/V connecting cable to your 
camcorder or the Handycam Station. The A/V 
jack accepts analog signals.



When connecting to another device via the 
S VIDEO jack, by using the A/V connecting 
cable with an S VIDEO cable (optional), 
pictures can be reproduced more faithfully 
than with the supplied A/V cable connection.
Connect the white and red plugs (left/right 
audio) and S VIDEO plug (S VIDEO 
channel) of an A/V connecting cable 
(optional). In this case, the yellow (standard 
video) plug connection is not necessary. S 
VIDEO connection only will not output 
audio.

Set [DISP OUTPUT] to [LCD PANEL] on 
the menu (p. 54) beforehand. (The default 
setting is [LCD PANEL].)

Use the supplied AC Adaptor as the 
power source.