Sony DCR-PC106E User Manual

Dubbing/Editing

62

You can create a copy of the picture recorded 
on your camcorder on other recording device 
(p. 63).
For DCR-PC107E, you can also record the 
picture from a VCR to a tape inserted into 
your camcorder (p. 64).
Connect your camcorder via the Handycam 
Station or the A/V OUT jack of your 
camcorder to a TV using the supplied A/V 
connecting cable.
Connect your camcorder to a TV or VCR as 
shown in the following illustration.

*1 By using an S video cable (optional), higher 

quality DV format pictures can be produced.
When there is an S video jack on the device to be 
connected, connecting the S video cable (optional) 
to the S video jacks on both the Handycam Station 
and the device instead of using the yellow plug is 
recommended. The audio will not be output when 
you connect with the S video plug alone.

*2 For DCR-PC106E:

The   DV Interface of your Handycam Station is 
designed for output use only. Your Handycam 
Station does not accept input data from the 
connected device.
For DCR-PC107E:
The   DV Interface of your Handycam Station is 
designed for input/output use.

b

• When you connect your camcorder to the other 

devices using the A/V connecting cable, make sure 
the [DISPLAY] setting in the 

 (OTHERS) 

menu is set to [LCD] (the default setting) before 
connecting (p. 61).

• When you are connecting your camcorder to a 

monaural device, connect the yellow plug of the A/
V connecting cable to the video jack, and the red or 
the white plug to the audio jack on the VCR or the 
TV.

• Do not connect the A/V connecting cables to both 

your camcorder and the Handycam Station. The 
recorded picture may be distorted.

A/V connecting cable 
(supplied)

i.LINK cable (optional)

 DV Interface*2

Signal flow

i.LINK jack

VCRs or TVs

A/V OUT jack

Yellow

Red

White

(For DCR-PC107E)

To the audio/video 
input jacks