Sony DCR-TRV285E User Manual
Recor
d
ing
Recording
25
Recording still
images
images
– Tape photo recording
(
(
TRV270E/285E)
You can record still images. Before
recording, follow steps 1 to 7 in “Getting
started” (p. 11 - p. 19).
recording, follow steps 1 to 7 in “Getting
started” (p. 11 - p. 19).
1
Remove the lens cap. Pull the lens cap
string down and attach it to the grip
belt.
string down and attach it to the grip
belt.
2
Press OPEN and open the LCD panel.
3
Slide the POWER switch to select the
CAMERA mode.
CAMERA mode.
4
Press and hold PHOTO lightly.
You will hear a small beep sound, and the
picture will become a still image.
Recording does not start at this point.
picture will become a still image.
Recording does not start at this point.
5
Press PHOTO fully.
A shutter sound is heard, and the image is
recorded with sound for 7 seconds.
The still image is displayed on the screen
until recording is completed.
recorded with sound for 7 seconds.
The still image is displayed on the screen
until recording is completed.
To turn the power off
Slide the POWER switch up to (CHG) OFF.
b
Note
•
appears when the tape photo recording does
not work.
z
Tip
• You can record about 510 images in the SP mode
and about 765 images in the LP mode on a tape
which can record for 60 minutes in the SP mode.
which can record for 60 minutes in the SP mode.
PHOTO
OPEN
POWER switch
Slide the POWER
switch while pressing
the green button.
switch while pressing
the green button.
CAPTURE
60
min
The indicator
appears.
appears.