Sony DCR-PC100 User Manual

VIDEO

AUDIO

IN

S VIDEO

AUDIO/VIDEO

S VIDEO

Using the A/V connecting cable

Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.
Set the input selector on the VCR to LINE, if available.

(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert

the recorded tape into your camcorder.

(2) Set the input selector on the VCR to LINE. For details, refer to the operating

instructions of the VCR.

(3) Set the POWER switch to VTR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR. For details, refer to the operating instructions of

the VCR.

When you have finished dubbing a tape

Press x on both your camcorder and the VCR.

Before a dubbing
Set DISPLAY to LCD in the menu settings. (Default setting is LCD.)

Be sure to clear the indicators from the screen
If they are displayed, press the following buttons not to record the indicators on the
dubbed tape:
• The DISPLAY button
• The DATA CODE button on the Remote Commander
• The SEARCH MODE button on the Remote Commander

 8 mm, 

 Hi8,   Digital8, 

 VHS, 

 S-VHS, 

 VHSC, 

 S-VHSC,

 Betamax, 

 ED Betamax, 

 mini DV or 

 DV

If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV. When the white
plug is connected, the left channel audio is output, and the red plug is connected, the
right channel audio is output.

— Editing —

Dubbing a tape

: Signal flow