Sony DCR-PC100 User Manual

[a]

[b]

[c]

5

4

ZERO SET

MEMORY

0:00:00

ZERO SET

MEMORY

REC

PAUSE

Inserting a scene from a VCR – Insert editing

You can insert a new scene from a VCR onto your originally recorded tape by
specifying the insert start and end points. Use the Remote Commander for this
operation. Connections are the same as on page 55 or 58.
Insert a cassette containing the desired scene to insert into the VCR.

[A]: A tape that contains the scene to be superimposed
[B]: A tape before editing
[C]: A tape after editing

(1) Set the POWER switch to VTR.
(2) On the VCR, locate just before the insert start point [a], then press X to set the

VCR to the playback pause mode.

(3) On your camcorder, locate the insert end point [c] by pressing m or M.

Then press X to set it to the playback pause mode.

(4) Press ZERO SET MEMORY on the Remote Commander.  The ZERO SET

MEMORY indicator flashes and the end point of the insert is stored in
memory. The tape counter shows “0:00:00.”

(5) On your camcorder, locate the insert start point [b] by pressing m, then press

z

 REC and the button on its right simultaneously, then immediately press X

on your camcorder.

(6) First press X on the VCR, and after a few seconds press X on your camcorder

to start inserting the new scene.
Inserting automatically stops near the zero point on the tape counter. Your
camcorder automatically returns to the recording pause mode.