Sony DCR-SR80E User Manual

Page of 128
111
Tr
 (Warning indicator pertaining to 
camera-shake warning)*
• The amount of lights is not sufficient, so 
camera-shake easily occurs. Use the 
flash.
• The camcorder is unsteady, so camera-
shake easily occurs. Hold the camcorder 
steady with both hands and record the 
image. However, note that the camera-
shake warning indicator does not 
disappear.
* You hear a melody when the warning indicators 
appear on the screen (p.60).
If messages appear on the screen, follow the 
instructions.
x
Battery
Use the “InfoLITHIUM” battery pack. 
(p.117)
Battery level is low. (p.14, 117)
Old Battery.  Use a new one. (p.117)
x
Hard disk
 Drive error. Turn on power again.
• A problem occurred with the hard disk. 
Turn off and then on again.
 Overheated. Cannot access HDD.
 Low temperature. Cannot access 
HDD.
 HDD full. Cannot record.
• Delete unnecessary images (p.42).
 Movie scene number is full. 
Cannot record.
• Delete unnecessary images (p.42).
 Movie folder full. Cannot record 
movies.
• Delete unnecessary images (p.42) or 
perform [HDD FORMAT].
 Still scene number is full. Cannot 
record.
• Delete unnecessary images (p.42).
 Still pic folder full. Cannot record 
stills.
• Delete unnecessary images (p.42) or 
perform [HDD FORMAT].
 Movie recording disabled.
• Movies cannot be recorded due to some 
limitations of the hard disk of the 
camcorder. However, you may be able to 
record still images.
 Still recording disabled.
• Still images cannot be recorded due to 
some limitations of the hard disk of the 
camcorder. However, you may be able to 
record movies.
No applicable files available.
• Image files have been deleted.
Format error. Please format.
• The hard disk of the camcorder is set 
differently from the default format. 
Performing [HDD FORMAT] (p.55) 
may enable you to use your camcorder.
Data error.
• An error occurred during reading or 
writing the hard disk of the camcorder. 
This may occur when you keep applying 
shock on the camcorder.
Access error.
• An error occurred during reading or 
writing the hard disk of the camcorder. 
This may occur when you keep applying 
shock on the camcorder.
Description of warning 
messages