Sony DCR-SX20K User Manual

When your TV is monaural (When your TV has only one audio input jack)

Connect the yellow plug of the A/V connecting cable to the video input jack and connect the

white (left channel) or red (right channel) plug to the audio input jack of your TV or VCR.

Notes

When you connect your camcorder to a TV compatible with the ID-1/ID-2 system, set [TV TYPE] to

[16:9]. The TV switches to full mode automatically. Refer also to the instruction manuals supplied with

your TV.

When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded image’s

aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter.

On some 4:3 TVs, the photos recorded in 4:3 aspect ratio may not be displayed full screen. This is not a

malfunction.

When you play back an image recorded in 16:9 (wide) aspect ratio on a 4:3 TV not compatible with the

16:9 (wide) signal, set [TV TYPE] to [4:3].

Tips

To check information (counter, etc.) on the screen of the monitor, select

(MENU)  [Show

others]  [OUTPUT SETTINGS] (under [GENERAL SET] category)  [DISP OUTPUT]  [V-

OUT/PANEL] 









