Sony DCR-TRV285E User Manual
Du
b
b
b
in
g
/E
d
itin
g
g
Dubbing/Editing
67
Recording pictures
from a VCR
from a VCR
(
TRV285E)
You can record and edit pictures from a VCR
on a tape inserted in your camcorder.
Insert a cassette for recording in your
camcorder.
on a tape inserted in your camcorder.
Insert a cassette for recording in your
camcorder.
1
Connect your VCR to your camcorder
(p. 61).
(p. 61).
Use an i.LINK cable (optional) for
connection.
connection.
2
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
select the PLAY/EDIT mode.
3
Press
(rec) and the button on its
right simultaneously on your
camcorder, then immediately press
camcorder, then immediately press
(pause) on your camcorder.
4
Start playing the cassette on your
VCR.
VCR.
The picture played on the connected device
appears on the LCD screen of your
camcorder.
appears on the LCD screen of your
camcorder.
5
Press
(pause) at the point you
want to start recording.
6
Press
(stop) to stop recording.
z
Tip
•
appears when you connect your camcorder
and other devices via an i.LINK cable. (This
indicator may also appear on your TV.)
indicator may also appear on your TV.)
Dubbing selected
scenes from a tape
scenes from a tape
– Digital program editing
(
(
TRV270E/285E)
You can select up to 20 scenes (programs)
and record them in the desired order to other
recording device such as VCR.
and record them in the desired order to other
recording device such as VCR.
Step 1: Preparing your camcorder
and VCR for operation
and VCR for operation
Follow the steps below when you are
performing digital program editing for the
first time to a tape in a VCR. You can skip
this setting if you have set up the VCR by the
following procedure before.
performing digital program editing for the
first time to a tape in a VCR. You can skip
this setting if you have set up the VCR by the
following procedure before.
b
Notes
• You cannot perform the Digital program editing on
the following devices:
– a VCR that does not support [IR SETUP] codes
– a DVD recorder, a DVD recorder equipped with an
– a VCR that does not support [IR SETUP] codes
– a DVD recorder, a DVD recorder equipped with an
HDD, etc
• When your camcorder is connected to the VCR via
the DV Interface, you cannot record the title or
indicators.
indicators.
1
Connect your VCR to the camcorder
as a recording device (p. 61).
as a recording device (p. 61).
You can use either the A/V connecting
cable or the i.LINK cable to make the
connection. The dubbing procedure is
easier with the i.LINK connection.
cable or the i.LINK cable to make the
connection. The dubbing procedure is
easier with the i.LINK connection.
Change the order
Results of editing
Delete unwanted scene
,continued