Sony DPP-FP65 User Manual
31
GB
Prin
ting
fro
m
a
Pic
tBri
dge
dge
ca
me
ra
me
ra
Printing from a PictBridge camera
Printing from a
PictBridge camera
PictBridge camera
You can connect a PictBridge-compliant digital
camera and print an image directly from your
digital camera.
camera and print an image directly from your
digital camera.
When printing in the PictBridge mode, make
sure to remove memory card(s) and your
computer from the printer in advance.
sure to remove memory card(s) and your
computer from the printer in advance.
1
Set your digital camera ready for
printing with a PictBridge-compliant
printer.
printing with a PictBridge-compliant
printer.
The required settings and operations that
must be completed before connection
differ depending on the digital camera.
For details, see the operating instructions
of your digital camera. (In case of Sony
Cyber-shot digital camera, for example,
select “PictBridge” mode for “USB
Connect”.)
must be completed before connection
differ depending on the digital camera.
For details, see the operating instructions
of your digital camera. (In case of Sony
Cyber-shot digital camera, for example,
select “PictBridge” mode for “USB
Connect”.)
2
Connect the printer to the AC power
source (page 12).
source (page 12).
3
Press the 1 (on/standby) button to
turn on the printer.
turn on the printer.
4
Connect the PictBridge-compliant
digital camera to the PictBridge/EXT
INTERFACE connector of the
printer.
digital camera to the PictBridge/EXT
INTERFACE connector of the
printer.
When you connect a PictBridge-compliant
digital camera to the printer, “PictBridge”
is displayed on the LCD display of the
printer.
digital camera to the printer, “PictBridge”
is displayed on the LCD display of the
printer.
5
Operate the digital camera to print
an image.
an image.
The printer supports the following prints:
• Single-image print
• All images print
• Index Print
• DPOF Print
• Borders/Borderless Print
• Date Print
• All images print
• Index Print
• DPOF Print
• Borders/Borderless Print
• Date Print
Notes
• If you replace an ink ribbon while the printer is
connected to a PictBridge-compliant digital
camera, an image may not be printed properly. If
this occurs, disconnect and then re-connect the
digital camera.
camera, an image may not be printed properly. If
this occurs, disconnect and then re-connect the
digital camera.
• When printing via the PictBridge/EXT
INTERFACE connector, an image will be printed
according to the settings of the Print setup menu of
the printer. When you set the Date Print or
Borders/Borderless options with your digital
camera, the digital camera settings will have
priority. If you select “Borderless” with the printer
and “Borders” with your camera, “Borders (Pattern
1)” will be used for printing.
according to the settings of the Print setup menu of
the printer. When you set the Date Print or
Borders/Borderless options with your digital
camera, the digital camera settings will have
priority. If you select “Borderless” with the printer
and “Borders” with your camera, “Borders (Pattern
1)” will be used for printing.
• You cannot use a USB hub or a digital camera
containing a USB hub.
• For error messages displayed on your digital
camera, refer to the operating instructions of your
digital camera.
digital camera.
To PictBridge/EXT
INTERFACE connector
INTERFACE connector
A PictBridge camera
To USB connector