Sony DG1 User Manual

Getting your Digital PCLink going is as simple as plugging it into a 
primary USB port of any computer running Windows 98, Windows 
Me, Windows 2000, or Mac OS 9.04. There’s no need to load any 
special software, but you will have to follow a few simple steps. After 
you have finished these steps, make sure to read our tips on recording 
before launching into a full session. 

Some computer systems ship with an OEM version of Windows 98 that does 
not contain the entire generic USB driver and audio platform. If you 
experience any trouble loading the USB drivers, please refer to the 
troubleshooting section at the end of this user manual for further instructions.

There is no need to turn your computer off when plugging the 
Digital PCLink in for the first time. Locate your computer’s USB 
port and plug the supplied USB cable in. Now plug the Digital 
PCLink into the other end of the USB cable.

Windows 98 will open an Add New Hardware Wizard and let 
you know it is found the Digital PCLink. It will then start loading 
drivers for a USB Composite Device, USB Human Interface 
Device, or USB Audio Device, depending on what components 
have previously been installed on your system. Click Next.

Check the option Search for the best driver for your 
device (Recommended) and click Next.