Sony dpf-d720-d710-d700 User Manual

Page of 55
27 
GB
Ad
va
nce
d o
pera
tio
ns
Refresh mode (DPF-
D1020/D820/D720 only)
Due to one of the characteristics of the device, 
images stored for a long time or read many 
times may be subject to data error.
The photo frame refreshes the internal memory 
automatically to prevent these errors, 
depending on the status of the internal memory.
The confirmation screen for refreshing the 
internal memory is displayed automatically 
when the refresh is needed. 
The refresh starts automatically when you 
select [Yes] or when no operation is attempted 
for 30 seconds. If you select [No], the 
confirmation screen for refreshing is displayed 
again when the refresh is needed.
Do not turn off the photo frame while the 
internal memory is being refreshed. It may 
cause a malfunction.
It may take approximately 5 minutes to refresh 
the internal memory.
Notes
• We recommend that you perform a backup of your 
data periodically to avoid losing it.
• Avoid running a slideshow continuously with fewer 
than 10 images with the interval set to 3 sec. Doing 
so could corrupt image data in internal memory.
Importing images from a 
memory card to the 
internal memory
You can use the photo frame as a digital album 
by saving important images in the internal 
memory.
Tips
• When saving images to the internal memory, you 
can use [Image import size] in the menu to preset 
whether to resize images to the optimum size or 
save them as they are without compressing them 
(page 41).
• When [Image import size] is set to [Resize], up to 
approximately 4000 images for the DPF-D1020/
D820/D720, 200 images for the DPF-D1010/D710/
D700, 150 images for DPF-D810, and 250 images 
for DPF-A710/A700. can be saved in the internal 
memory. When set to [Original], the number of 
images that can be saved may vary, depending on 
the original image file size.
1
Press MENU when an image stored 
in the memory card is displayed on 
the screen.
The menu screen is displayed.
Using the remote control (except 
for DPF-A700/D700)
Press 
 (IMPORT) when an image 
stored in the memory card is displayed on 
the screen. The [Import] screen described 
in step 2 below is displayed. Go to step 3.
2
Press 
B/b to select the 
 (Editing) 
tab, select [Import] with 
v/V, and 
press ENTER.
Continued