Sony dru-700a User Manual

15

Set

u

p

Depending on the settings of your computer, use one of the following 
configurations.

Your computer has two IDE connectors: a primary and a secondary connector. You can 
connect up to two devices to each connector using cables (one master device and one slave 
device per cable; hard disk, CD, or DVD drives, etc.). The hard disk of your computer is 
normally connected on the primary IDE cable as the master device. Before connecting the 
drive, refer to the items below to determine your situation, and then place the jumper in the 
MASTER or SLAVE position.

Connect the drive as follows.

st drive

Hard disk drive (usually)
MASTER

Current optical 
drive