Sony 3-869-574-12(1) User Manual

Page of 73
6
Features
Chapter 
1
Overview
Features
The DSR-1600A/1600AP is a 
1
/
4
-inch digital video 
cassette player using the DVCAM digital recording 
format. It achieves stable, superb picture quality by 
digitally processing video signals separated into color 
difference signals and luminance signals (component 
method).
The unit is equipped with a variety of functions needed for 
videocassette players used in professional digital video 
editing systems. 
The unit is also equipped with an i.LINK interface, thus 
enabling simple connection with a nonlinear editing* 
system supporting DV format.
Futhermore, the unit is equipped with a full-fledged analog 
interface to support hybrid systems that combine 
conventional analog equipment with digital equipment.
* Non-linear editing: This is an editing method that uses video and audio 
signals digitally encoded and recorded on a hard disk as digital data. When 
compared with conventional (linear) editing methods, non-linear editing 
offers vastly improved efficiency in editing operations, for example, by 
eliminating tape transport time.
The main features of the unit are described in the 
following.
DVCAM Format
DVCAM is based on the consumer DV format, which uses 
the 4:1:1 component digital format, and provides a 
1
/
4
-inch 
digital recording format for professional use.
High picture quality, high stability
Video signals are separated into color difference signals 
and luminance signals, which are encoded and compressed 
to one-fifth size before being recorded to ensure stable and 
superb picture quality.
Because the recording is digital, multi-generation dubbing 
can be performed with virtually no deterioration of quality. 
Wide track pitch
The recording track pitch is 15 µm, fully 50 percent wider 
than the 10-µm track pitch of the DV format. Thanks to this 
feature, the DVCAM format sufficiently meets the 
reliability and precision requirements of professional 
editing.
High-quality PCM digital audio 
PCM recording makes for a wide dynamic range and a 
high signal-to-noise ratio, thereby enhancing sound 
quality.
There are two recording modes: 2-channel mode (48-kHz 
sampling and 16-bit quantization), which offers sound 
quality equivalent to the DAT (Digital Audio Tape) 
format, or 4-channel mode (32-kHz sampling and 12-bit 
quantization). Cassettes recorded in either mode can be 
played back on this unit.
Playback compatibility with DV and 
DVCPRO formats
A DV cassette recorded on a DV format VCR (excluding 
the tapes recorded in LP mode) as well as a DVCPRO 
(25M) format recorded cassette can be played back on this 
unit. 
Note
When playing back a tape recorded in DVCPRO (25M) 
format, the i.LINK output (see “Digital interfaces” on 
page 7)
 of this unit is subjected to muting. Furthermore, it 
is not possible to play back the cue-audio track of the tape.