Sony dvo-1000md User Manual
Record
ing
Handling Discs
22
Recording
Handling Discs
Usable Discs
You can use the DVD+RW discs corresponding to quad
speed.
speed.
Note
You can use discs for both data and video.
Formatting discs
An unused disc requires no formatting operation. The
disc is automatically formatted when loaded into the
unit.
When you use a disc formatted by a computer or
recorded by using other DVD equipment, format the
disc using the FORMAT sub menu of DISC INFO.
disc is automatically formatted when loaded into the
unit.
When you use a disc formatted by a computer or
recorded by using other DVD equipment, format the
disc using the FORMAT sub menu of DISC INFO.
Note
When a recorded disc is formatted, all the data on the
disc is erased.
For detailed information on how to format a disc, see
“Formatting a Disc” on page 33.
disc is erased.
For detailed information on how to format a disc, see
“Formatting a Disc” on page 33.
Notes on Handling
Handling
• Do not touch the recording or playback surface of the
• Do not touch the recording or playback surface of the
disc. Handle the disc by its edge.
• Do not use the following types of disc. Doing so may
cause the unit to malfunction.
– A disc on which a paper label or a seal is attached
– A disc on which the glue of cellophane tape or a
– A disc on which a paper label or a seal is attached
– A disc on which the glue of cellophane tape or a
label, or on which a portion of a label still remains
– A cracked disc
– A cracked disc which has been mended using glue
– A cracked disc which has been mended using glue
(or a similar substance)
Storage
• Do not store discs where they may be subjected to
• Do not store discs where they may be subjected to
direct sunlight, or in other places where the
temperature or humidity is high.
temperature or humidity is high.
• Store discs in their cases.
• Finger prints or dust accumulated on the disc cause
• Finger prints or dust accumulated on the disc cause
deterioration of picture quality. Keep the disc clean.
Care of the discs
• Clean the disc with a soft cloth, wiping it from the
• Clean the disc with a soft cloth, wiping it from the
center out. If the dust is heavy, wipe it with a soft cloth
moistened with water, then wipe off the water with a
dry cloth.
moistened with water, then wipe off the water with a
dry cloth.
• Do not use solvents such as benzene, thinner,
commercially available record cleaners, or anti-static
spray. Using these products may damage discs.
spray. Using these products may damage discs.
Loading and Unloading Discs
Loading a disc
1
Press the 1 (power) switch to turn the power on.
The message “Welcome” appears on the front panel
display.
The message changes to “Now loading...,” and then
“NO DISC!” lights. Proceed to the next operation.
display.
The message changes to “Now loading...,” and then
“NO DISC!” lights. Proceed to the next operation.
Note
If the 1 (power) is not turned on and the front panel
display does not light even if you press the power
display does not light even if you press the power
1
3
2,4