Sony dvo-1000md User Manual

Pl

a

y

bac

k

Playback

34

You can use the 4 x DVD+RW discs.

The recorded discs may not be able to be played back 
due to scratch on the disc, dust accumulated on the disc, 
conditions recorded or recording equipment.

Press the 1 (power) switch to turn the power on.

The message “Welcome” appears on the front 
panel.
When the message changes to “Now loading...”, 
and then to “NO DISC!.”, go to the next operation.

If the power is not turned on and the front panel 
display does not light even if you press the 1 
(power) switch, check whether the MAIN POWER 
switch on the rear panel is set to the ] (on) side.
For detailed information on how to turn the power 
on or off, see “Turning the Power On/Off” on page 
15.

Press the OPEN/CLOSE button.

The disc tray opens.
The message changes to “OPEN” on the front panel 
display.

Place the disc to be played on the tray.

Press the OPEN/CLOSE button.

The disc tray closes.
The DISC IN display blinks and the message “Now 
loading...” appears on the front panel display.
Go to step 5, after the message Now loading...” 
disappears and the DISC IN display lights up.

Press the BPLAY button.

Playback starts.

For a moment, the picture is frozen and audio 
playback stops between titles.

To stop playback
Press the xSTOP button.

To view fast forward playback
Press the >NEXT/DOWN button with the BPLAY 
button held down. This allows you to view fast forward 
playback at a speed three times the speed of normal 
playback.

To view reverse playback
Press the .PREV/UP button with the BPLAY button 
held down. This allows you to view fast reverse 
playback at a speed three times the speed of normal 
playback.

You can add indexes using the SVRM-100A remote 
control unit.
For detailed information on how to add indexes, see 
“Using an SVRM-100A Remote Control Unit (Not 
Supplied)” on page 57.

x

STOP button