Sony dvp-nc66k User Manual

F:\SONY DVD\2667815F11 DVP-
NC66K_GB\SOURCE\DVP-
NC66K_GB\01GB16ADD-CEK.fm

master page=left

DVP-NC66K

2-667-815-F1(1)

If you experience any of the following 
difficulties while using the player, use this 
troubleshooting guide to help remedy the 
problem before requesting repairs. Should 
any problem persist, consult your nearest 
Sony dealer.

, Check that the mains lead is connected 

securely.

, Re-connect the connecting cord securely.
, The connecting cords are damaged.
, Check the connection to your TV (page 15) 

and switch the input selector on your TV so 
that the signal from the player appears on 
the TV screen.

, The disc is dirty or flawed.
, If the picture output from your player goes 

through your VCR to get to your TV or if 
you are connected to a combination TV/
VIDEO player, the copy-protection signal 
applied to some DVD programmes could 
affect picture quality. If you still experience 
problems even when you connect your 
player directly to your TV, try connecting 
your player to your TV’s S VIDEO input 
(page 15).

, The disc is recorded in a colour system that 

is different from your TV.

, You have selected “PROGRESSIVE 

AUTO” or “PROGRESSIVE VIDEO” 
using the PROGRESSIVE button on the 
front panel (the PROGRESSIVE indicator 
lights up) even though your TV cannot 
accept the progressive signal. In this case, 
select “NORMAL (INTERLACE)” so that 
the PROGRESSIVE indicator turns off.

, If the colour system of your player does not 

match with that of your TV, change the 
colour system of the player. For details, see 
page 16. (You cannot change the colour 
system of the DVD disc itself.) 

, Even if your TV is compatible with 

progressive format 525p/625p signals, the 
image may be affected when you set the 
player to progressive format. In this case, 
select “NORMAL (INTERLACE)” using 
the PROGRESSIVE button on the front 
panel so that the PROGRESSIVE indicator 
turns off and the player is set to normal 
(interlace) format.

, The aspect ratio of the disc is fixed on your 

DVD.

, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, The player is connected to the wrong input 

jack on the amplifier (receiver) (page 18).

, The amplifier (receiver) input is not 

correctly set.

, The player is in pause mode or in Slow-

motion Play mode.

, The player is in fast forward or fast reverse 

mode.

, If the audio signal does not come through 

the DIGITAL OUT (OPTICAL or 
COAXIAL) jack, check the audio settings 
(page 72).

, While playing a Super VCD on which the 

audio track 2 is not recorded, no sound will 
come out when you select “2:STEREO,” 
“2:1/L,” or “2:2/R.”

, When playing multichannel MPEG audio 

soundtracks, only the Front (L) and Front 
(R) signals will be output from two front 
speakers.

, Set “AUDIO ATT” in “AUDIO SETUP” to 

“ON” (page 71).

, The sound volume is low on some DVDs. 

The sound volume may improve if you set 
“AUDIO DRC” in “AUDIO SETUP” to 
“TV MODE” (page 71).

, Set “AUDIO ATT” in “AUDIO SETUP” to 

“OFF” (page 71).