Sony DVP-NC80V User Manual
D:\SONY DVD\2591934111 DVP-
NC80V\SOURCE\DVP-
NC80V_US\01US05GET-CEK.fm
NC80V\SOURCE\DVP-
NC80V_US\01US05GET-CEK.fm
master page=left
24
DVP-NC80V
2-591-934-11(1)
7
Press X/x to select the setting that
matches your TV type.
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
• 4:3 LETTER BOX or 4:3 PAN SCAN
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
of jack used to connect your amplifier
(receiver) appears.
9
Press X/x to select the type of jack
(if any) you are using to connect to
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
ENTER.
If you did not connect an AV amplifier
(receiver), select “NO.” Quick Setup is
finished and connections are complete.
If you connected an AV amplifier
(receiver) using just an audio cord, select
“YES: LINE OUTPUT L/R (AUDIO).”
Quick Setup is finished and connections
are complete.
If you connected an AV amplifier
(receiver) using a digital coaxial or
optical cord, select “YES: DIGITAL
OUTPUT.” Setup Display for “DOLBY
DIGITAL” appears.
If you connected an AV amplifier
(receiver) using an audio cord, select
“YES : DIGITAL & 5.1CH OUTPUT.”
The Setup Display for “DOLBY
DIGITAL” appears.
(receiver), select “NO.” Quick Setup is
finished and connections are complete.
If you connected an AV amplifier
(receiver) using just an audio cord, select
“YES: LINE OUTPUT L/R (AUDIO).”
Quick Setup is finished and connections
are complete.
If you connected an AV amplifier
(receiver) using a digital coaxial or
optical cord, select “YES: DIGITAL
OUTPUT.” Setup Display for “DOLBY
DIGITAL” appears.
If you connected an AV amplifier
(receiver) using an audio cord, select
“YES : DIGITAL & 5.1CH OUTPUT.”
The Setup Display for “DOLBY
DIGITAL” appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
If your AV amplifier (receiver) has a
Dolby Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”
Dolby Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”
11
Press ENTER.
“DTS” is selected.
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
• If your AV amplifier (receiver) has a DTS
decoder, select “DTS.” Otherwise,
select “D-PCM.”
select “D-PCM.”
13
Press ENTER.
◆ When “DIGITAL OUTPUT” is selected
in step 9
• Quick Setup is finished and
in step 9
• Quick Setup is finished and
connections are complete.
◆ When “DIGITAL & 5.1CH OUTPUT” is
selected in step 9
• The Setup Display for “SPEAKER
selected in step 9
• The Setup Display for “SPEAKER
SETUP” appears.
14
Press X/x to select the size of the
center speaker.
If no center speaker is connected, select
“NONE” (page 71).
“NONE” (page 71).
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
(receiver)? Select the type of jack you
are using.
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
YES
NO
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS:
DOLBY DIGITAL
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS
DTS:
D-PCM
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
LARGE
YES
SMALL
NONE
LARGE
01ΥΣ01ΧΟς.βοοκ Παγε 24 Τηυρσδαψ, Φεβρυαρψ 24, 2005 4:00 ΠΜ