Sony dvp-nc650v User Manual

“AUDIO SETUP” allows you to set the 
sound according to the playback and 
connection conditions.

Select “AUDIO SETUP” in the Setup 
Display. For details on using the display, see 
“Using the Setup Display” (page 77).
The default settings are underlined.

x

If the playback sound is distorted, set this 
item to “ON.” The player reduces the audio 
output level.
This function affects the output of the 
following jacks:
– LINE OUT L/R (AUDIO) 1/2 jacks
– 5.1CH OUTPUT jacks
– PHONES jack

x

Makes the sound clear when the volume is 
turned down when playing a DVD that has 
the “AUDIO DRC” function. This affects the 
output from the following jacks:
– LINE OUT L/R (AUDIO) 1/2 jacks
– 5.1CH OUTPUT jacks
– DIGITAL OUT (OPTICAL or COAXIAL) 

jack only when “DOLBY DIGITAL” is set 
to “D-PCM” in “DIGITAL OUT” (page 
84).

– PHONES jack

x

Selects the digital filter to reduce noises 
above the 22.05 kHz (Sampling frequency 
(Fs) of the audio sources is 44.1 kHz), 24 kHz 
(Fs is 48 kHz), or 48 kHz (Fs is above 96 
kHz). 

• There may be little effect by changing the digital 

filter depending on discs or playback environment.

• There is no effect on SACDs.

OFF

Turns off the audio attenuation.
Normally, select this position.

ON

Reduces the audio output level so 
that no sound distortion occurs.
Select this when the playback 
sound from the speakers is 
distorted.

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

OFF

STANDARD

AUDIO FILTER:

SHARP

ON

DOWNMIX:

DOLBY SURROUND

DOLBY DIGITAL:

D-PCM

DTS:

D-PCM

48kHz/96kHz PCM:

48kHz/16bit

STANDARD

Normally, select this position.

TV MODE

Makes the low sounds clear even 
if you turn the volume down. It 
is especially recommended 
when you listen to the sound 
using the speakers of the TV.

WIDE 
RANGE

Gives you the feeling of being at 
a live performance. When you 
use high quality speakers, it is 
even more effective. 

SHARP

Provides a wide frequency 
range and spatial feeling.

SLOW

Provides smooth and warm 
sound.

,