Sony dvp-ns999es User Manual
83
Additional information
Additional Information
Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
Power
The power is not turned on.
, Check that the power cord (mains lead) is
connected securely.
Picture
There is no picture/picture noise appears.
, Re-connect the connecting cord securely.
, The connecting cords are damaged.
, Check the connection to your TV (page 21)
, The connecting cords are damaged.
, Check the connection to your TV (page 21)
and switch the input selector on your TV
so that the signal from the player appears
on the TV screen.
so that the signal from the player appears
on the TV screen.
, The disc is dirty or flawed.
, If the picture output from your player goes
, If the picture output from your player goes
through your VCR to get to your TV or if
you are connected to a combination TV/
VIDEO player, the copy-protection signal
applied to some DVD programmes could
affect picture quality. If you still
experience problems even when you
connect your player directly to your TV,
please try connecting your player to your
TV’s S VIDEO input (page 21).
you are connected to a combination TV/
VIDEO player, the copy-protection signal
applied to some DVD programmes could
affect picture quality. If you still
experience problems even when you
connect your player directly to your TV,
please try connecting your player to your
TV’s S VIDEO input (page 21).
, You have set “COMPONENT OUT” in
“SCREEN SETUP” to “PROGRESSIVE”
even though your TV cannot accept the
signal in progressive format. In this case,
set the COMPONENT VIDEO OUT/
SCAN SELECT switch on the rear panel
of the player to INTERLACE. Then set
“COMPONENT OUT” to “INTERLACE”
after you can see the TV screen correctly,
and reset the COMPONENT VIDEO OUT/
SCAN SELECT switch to SELECTABLE.
even though your TV cannot accept the
signal in progressive format. In this case,
set the COMPONENT VIDEO OUT/
SCAN SELECT switch on the rear panel
of the player to INTERLACE. Then set
“COMPONENT OUT” to “INTERLACE”
after you can see the TV screen correctly,
and reset the COMPONENT VIDEO OUT/
SCAN SELECT switch to SELECTABLE.
, Even if your TV is compatible with
progressive format (525p) signals, the
image may be affected when you set
“COMPONENT OUT” to
“PROGRESSIVE.” In this case, set
“COMPONENT OUT” to “INTERLACE.”
image may be affected when you set
“COMPONENT OUT” to
“PROGRESSIVE.” In this case, set
“COMPONENT OUT” to “INTERLACE.”
, You have selected “VIDEO OFF” (page
34).
, You are playing a disc recorded in a colour
system that is different from your TV.
Even though you set the aspect ratio in
“TV TYPE” of “SCREEN SETUP,” the
picture does not fill the screen.
“TV TYPE” of “SCREEN SETUP,” the
picture does not fill the screen.
, The aspect ratio of the disc is fixed on your
DVD.
Sound
There is no sound.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, The player is connected to the wrong input
, The connecting cord is damaged.
, The player is connected to the wrong input
jack on the amplifier (receiver) (page 26,
27, 28).
27, 28).
, The amplifier (receiver) input is not
correctly set.
, The player is in pause mode or in Slow-
motion Play mode.
, The player is in fast forward or fast reverse
mode.
, If the audio signal does not come through
the DIGITAL OUT (OPTICAL or
COAXIAL) jack, check the audio settings
(page 78).
COAXIAL) jack, check the audio settings
(page 78).
, Super Audio CD audio signals are not
output from the digital jack.
, While playing a Super VCD on which the
audio track 2 is not recorded, no sound will
come out when you select “2:STEREO,”
“2:1/L,” or “2:2/R.”
come out when you select “2:STEREO,”
“2:1/L,” or “2:2/R.”
Sound distortion occurs.
, Set “AUDIO ATT” in “AUDIO SETUP” to
“ON” (page 78).
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
“AUDIO DRC” to “TV MODE” (page 78).
“AUDIO DRC” to “TV MODE” (page 78).
, Set “AUDIO ATT” in “AUDIO SETUP” to
“OFF” (page 78).
,
continued