Sony DVP-NS755V User Manual

To obtain the best possible surround sound, 
set the size of the speakers you have 
connected and their distance from your 
listening position. Then use the test tone to 
adjust the volume and the balance of the 
speakers to the same level.
This setting is effective when connecting the 
speaker with 5.1 CH OUTPUT jacks (page 
27).

Select “SPEAKER SETUP” in the Setup 
Display. To use the display, see “Using the 
Setup Display” (page 73).
The default settings are underlined.

Select the item, then press CLEAR. Note that 
only the “SIZE” setting does not return to the 
default setting.

◆ SIZE

Selects the size of the speakers.
• FRONT

• CENTER

• REAR

* Rear speaker position
Correctly specify the location of the rear speakers to 
enjoy the surround effect.
• Set to “SIDE,” if the location of the rear speakers 

corresponds to section A below.

• Set to “REAR,” if the location of the rear speakers 

corresponds to section B below.

This setting affects only “VIRTUAL REAR 
SHIFT,” “VIRTUAL MULTI REAR,” and 
“VIRTUAL MULTI DIMENSION” mode (page 
57). This setting does not affect the Super Audio 
CD Multi audio signals.

LARGE

Normally select this position.

SMALL

Select this when the sound 
distorts or the surround effects 
are difficult to hear.

SPEAKER SETUP

DISTANCE:
BALANCE:
LEVEL: 

OFF

TEST TONE:

FRONT:
CENTER:

YES

LARGE(REAR)

LARGE

LARGE

REAR:
SUBWOOFER:

SIZE:

NONE

Select this if you do not connect 
a center speaker.

LARGE

Normally select this position.

SMALL

Select this when the sound 
distorts or the surround effects 
are difficult to hear.

NONE

Select this if you do not connect 
rear speakers.

LARGE

(REAR/SIDE): Normally select 
this position. Select according 
to the rear speaker position*.

SMALL

(REAR/SIDE): Select this 
when the sound distorts or the 
surround effects are difficult to 
hear.
Select according to the rear 
speaker position*.

,