Sony dvp-sr200p-b User Manual

Page of 48
2
US
WARNING
To reduce the risk of fire or 
electric shock, do not expose 
this apparatus to rain or 
moisture.
To avoid electrical shock, do 
not open the cabinet. Refer 
servicing to qualified 
personnel only.
The AC power cord must be 
changed only at a qualified 
service shop.
Batteries or batteries 
installed
 apparatus shall not 
be exposed to
 excessive 
heat such as sunshine,
 fire 
or the like.
CAUTION
The use of optical instruments with 
this product will increase eye 
hazard. As the laser beam used in 
this CD/DVD player is harmful to 
eyes, do not attempt to disassemble 
the cabinet.
Refer servicing to qualified 
personnel only.
This symbol is 
intended to alert the 
user to the presence 
of uninsulated 
“dangerous voltage” 
within the product’s enclosure that 
may be of sufficient magnitude to 
constitute a risk of electric shock to 
persons.
This symbol is 
intended to alert the 
user to the presence 
of important 
operating and 
maintenance (servicing) 
instructions in the literature 
accompanying the appliance.
CAUTION
You are cautioned that any 
changes or modifications not 
expressly approved in this manual 
could void your authority to 
operate this equipment.
For customers in the U.S.A
Owner’s Record
The model and serial numbers are 
located at the rear of the unit. 
Record the serial number in the 
space provided below. Refer to 
them whenever you call upon your 
Sony dealer regarding this product.
Model No. DVP-SR200P
Serial No.______________
Note
This equipment has been tested 
and found to comply with the 
limits for a Class B digital device, 
pursuant to Part 15 of the FCC 
Rules. These limits are designed to 
provide reasonable protection 
against harmful interference in a 
residential installation. This 
equipment generates, uses, and can 
radiate radio frequency energy 
and, if not installed and used in 
accordance with the instructions, 
may cause harmful interference to 
radio communications. However, 
there is no guarantee that 
interference will not occur in a 
particular installation. If this 
equipment does cause harmful 
interference to radio or television 
reception, which can be 
determined by turning the 
equipment off and on, the user is 
encouraged to try to correct the 
interference by one or more of the 
following measures:
– Reorient or relocate the 
receiving antenna.
– Increase the separation 
between the equipment and 
receiver.
– Connect the equipment into an 
outlet on a circuit different 
from that to which the receiver 
is connected.
– Consult the dealer or an 
experienced radio/TV 
technician for help.
IMPORTANT SAFETY 
INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus 
near water.
6) Clean only with dry cloth.
7) Do not block any ventilation 
openings. Install in 
accordance with the 
manufacturer’s instructions.
8) Do not install near any heat 
sources such as radiators, 
heat registers, stoves, or 
other apparatus (including 
amplifiers) that produce 
heat.
9) Do not defeat the safety 
purpose of the polarized or 
grounding-type plug. A 
polarized plug has two 
blades with one wider than 
the other. A grounding type 
plug has two blades and a 
third grounding prong. The 
wide blade or the third prong 
are provided for your safety. 
If the provided plug does not 
fit into your outlet, consult 
an electrician for 
replacement of the obsolete 
outlet.
10) Protect the power cord from 
being walked on or pinched 
particularly at plugs, 
convenience receptacles, 
and the point where they exit 
from the apparatus.
11) Only use attachments/
accessories specified by the 
manufacturer.
12) Use only with the cart, stand, 
tripod, bracket, or table 
specified by the 
manufacturer, or sold with 
the apparatus. When a cart is 
used, use caution when 
moving the cart/apparatus 
combination to avoid injury 
from tip-over.
13) Unplug this apparatus during 
lightning storms or when 
unused for long periods of 
time.
14) Refer all servicing to 
qualified service personnel. 
Servicing is required when 
the apparatus has been 
damaged in any way, such as 
power-supply cord or plug is 
damaged, liquid has been 
spilled or objects have fallen 
into the apparatus, the 
apparatus has been exposed 
to rain or moisture, does not 
operate normally, or has 
been dropped.