Sony dvp-ns900v User Manual

x

Eliminates the use of unnecessary circuits 
when playing CDs. This setting will be 
activated when you open or close the disc 
tray.
This function affects the output of the 
following jacks:
— AUDIO OUT L/R 1/2 jacks
— 5.1CH OUTPUT jacks
— PHONES jack

If you select “ON” when playing CD type DTS discs, 
the sound will become noisy.

“AUDIO SETUP” allows you to set the 
sound according to the playback and 
connection conditions.

Select “AUDIO SETUP” in the Setup 
Display. For details on using the display, see 
“Using the Setup Display” (page 83).
The default settings are underlined.

x

If the playback sound is distorted, set this 
item to “ON.” The player reduces the audio 
output level.
This function affects the output of the 
following jacks:
— AUDIO OUT L/R 1/2 jacks
— 5.1CH OUTPUT jacks
— PHONES jack

x

Makes the sound clear when the volume is 
turned down when playing a DVD that has 
the “AUDIO DRC” function. This affects the 
output from the following jacks:
— AUDIO OUT L/R 1/2 jacks
— 5.1CH OUTPUT jacks
— PHONES jack

OFF

Select this when playing CD discs, 
including CD type DTS discs.

ON

Eliminates the use of unnecessary 
circuits needed to play CDs.

OFF

Turns off the audio attenuation.
Normally, select this position.

ON

Reduces the audio output level so that 
no sound distortion occurs.
Select this when the playback sound 
from the speakers is distorted.

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

OFF

STANDARD

AUDIO FILTER:

SHARP

ON

DOWNMIX:

DOLBY SURROUND

DOLBY DIGITAL:
MPEG:

D-PCM

PCM

DTS:

D-PCM

48kHz/96kHz PCM:

48kHz/16bit