Sony dvp-ns900v User Manual

x

Selects the sampling frequency of the audio 
signal to be output via the DIGITAL OUT 
(OPTICAL or COAXIAL) jack.

•

Even if you set “48kHz/96kHz PCM” in “AUDIO 
SETUP” to “96kHz/24bit,” the sampling frequency 
is converted to 48kHz/16bit when a “SURROUND” 
mode (page 62) is selected.

•

The analog audio signals from the AUDIO OUT L/
R 1/2 jacks and 5.1 CH OUTPUT jacks are not 
affected by this setting and keep their original 
sampling frequency level.

To obtain the best possible surround sound, 
set the size of the speakers you have 
connected and their distance from your 
listening position. Then use the test tone to 
adjust the volume and the balance of the 
speakers to the same level.
This setting is effective when connecting the 
speaker with 5.1 CH OUTPUT jacks (page 
25).

Select “SPEAKER SETUP” in the Setup 
Display. For details on using the display, see 
“Using the Setup Display” (page 83).
The default settings are underlined.

Select the item, then press CLEAR. Note that 
only the “SIZE” setting does not return to the 
default setting.

x

Selects the size of the speakers to be 
connected.

•

FRONT

DTS

Select this when the player is 
connected to an audio 
component having a built-in 
DTS decoder. If the player is 
connected to an audio 
component lacking a built-in 
DTS decoder, do not set this. 
Otherwise, when you play the 
DTS sound track, a loud noise 
(or no sound) will come out from 
the speakers, affecting your ears 
or causing the speakers to be 
damaged.

48kHz/16bit

The audio signals of DVD 
VIDEOs are always converted to 
48kHz/16bit.

96kHz/24bit

All types of signals including 
96kHz/24bit are output in their 
original format. However, if the 
signal is encrypted for copyright 
protection purposes, the signal is 
only output as 48kHz/16bit.
If a receiver (amplifier) which 
cannot accept 96kHz is 
connected to the player, do not 
set this. Otherwise, a loud noise 
may come out from the speakers.

LARGE

Normally select this position.

SMALL

When the sound cracks or the 
surround sound effects are difficult to 
hear, select this. This activates the 
bass redirection circuitry and outputs 
the bass frequencies of the front 
speaker from the subwoofer.

SPEAKER SETUP

DISTANCE:
BALANCE:
LEVEL: 

OFF

TEST TONE:

FRONT:
CENTER:

YES

LARGE(REAR)

LARGE

LARGE

REAR:
SUBWOOFER:

SIZE: