Sony DXC-990 User Manual

Page of 180
D:\Nouhin\DXC990UC\320554311DXC990UC\02GB-
DXC990UC\02REG.fm
masterpage:Left
GB 
2
DXC-990/990P
3-205-543-11 (1)
Owners Record
The model and serial numbers are located on 
the bottom. Record these numbers in the 
spaces provided below.
Refer to these numbers whenever you call 
upon your Sony dealer regarding this 
product.
Model No.
 Serial No.
To prevent fire or shock hazard, do 
not expose the unit to rain or 
moisture.
To avoid electrical shock, do not 
open the cabinet. Refer servicing to 
qualified personnel only.
For the customers in the U.S.A.
This equipment has been tested and found to 
comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide 
reasonable protection against harmful 
interference when the equipment is operated 
in a commercial environment.
This equipment generates, uses, and can 
radiate radio frequency energy and, if not 
installed and used in accordance with the 
instruction manual, may cause harmful 
interference to radio communications. 
Operation of this equipment in a residential 
area is likely to cause harmful interference in 
which case the user will be required to 
correct the interference at his own expense.
You are cautioned that any changes or 
modifications not expressly approved in this 
manual could void your authority to operate 
this equipment.
The shielded interface cable recommended 
in this manual must be used with this 
equipment in order to comply with the limits 
for digital device pursuant to Subpart B of 
Part 15 of FCC Rules. 
For the customers in Europe (for 
DXC-990P only)
This product with the CE marking complies 
with the EMC 
Directive (89/336/EEC) issued by the 
Commission of the European Community.
Compliance with this directive implies 
conformity to the following European 
standards:
 EN55103-1: Electromagnetic Interference 
(Emission)
 EN55103-2: Electromagnetic Susceptibility 
(Immunity)
This product is intended for use in the 
following
Electromagnetic Environment(s):
E1 (residential), E2 (commercial and light 
industrial), E3 (urban outdoors) and E4 
(controlled EMC environment, ex. TV 
studio)
WARNING